Amzdeal Hand Held Brake Bleeder Vacuum Pump Test Tuner Kit Tools with Case Hoses Connector for Automotive (Automotive)
Hand Held Vacuum Tester and Pump Brake Bleeder Kit
Do not use the vacuum pump to siphon liquid
Brake fluid bleeder works with your air compressor to quickly assist in your brake bleeding! Flush and refill the entire brake system by yourself with this brake fluid bleeder. 34 oz Waster Brake Fluid Tank 24 oz New Fluid tank that inserts into your master cylinder with provided adapters Air requirement: 90 to 120 PSI, Air inlet: 1/4”- 18 NPT
Motive Products, European Power Brake Bleeder, 0100, Hand Pump Pressure Tank with Adapter (Automotive)
Works on most European cars, including Alfa Romeo, Audi, BMW, Fiat, Mercedes, Peugeot, Porsche,
Why change Brake fluid? It is hygroscopic and absorbs water from the atmosphere, lowering its boiling point
Dorman Products, Inc. is well-known as a leader in providing quality auto parts to the aftermarket. We’ve earned our reputation for excellence from over three decades of experience in providing automotive replacement parts, fasteners and service line products primarily for the automotive aftermarket. Our prestigious position stems from a unique combination of application expertise, innovative product design, and breadth of product offerings, many of which are not conveniently or economically available elsewhere. At Dorman, we take pride in the quality of our products and in your satisfaction.
Brake Bleeder and Vacuum Pump Tester 2 in 1 Tool Kit
Bleed your brakes yourself without the mess, works with all vehicle and models.
0-30 Inches HG
0-76 CM HG
2 Vacuum Hoses 1/4″ ID X 23″ LONG
2 Vacuum Hoses 1/4″ ID X 3″ LONG
2 Tapered Hose Adapters
1 T Hose Connector
1 Straight Hose Connector
3 Brake Bleeder Valve Adapter
1 Universal Cup Adapter
1 4 0Z. Reservoir Jar
2 Jar Lids
NOTE: This product cannot achieve a full vacuum of -30″Hg though the gauge does show to that level. Brake bleeding does not require that deep of a vacuum.
HFS is a TradeMark of Hardware Factory Store Inc. This Item is not allowed to be sold by any other seller in Amazon.
Contain the mess of bleeding brakes with this easy to use kit. Fluid is captured in a large capacity 16 oz. bottle to help keep your driveway or garage floor clean! The removable cap has a built-in fitting to secure the hose during storage helping to prevent fluid leaks and spills after the job is done. Kit is suitable for multiple use on most automotive brake systems.
Diaphragm-type bleeder for conventional and ant-lock brake systems allows for one-man operation. Keeps brake fluid and air separated. Steel construction.
BAKIT01 Complete Master Cylinder Adapter Set (12 adapters) for Domestic, Import and Universal Manufacturers.
Pressure Bleeder Hose Coupler adapter designed to fit 1/4 Inch hose to a typical automotive brake system bleeder.
2 Qt Tank with Hose
Inline tube – INL13347 – Master Cylinder Bleeder Kit – This kit is to pump and manual bleed the master cylinder before it is installed on the car – comes complete with instructions. Putting a master on the car that has not been prepaired can take hours longer to bleed the brakes. You should always get the air out of the system as much as you can. This means pushing all pistions in as far as they will go and bleeding all masters. This kit will save you time and money. Applications: 1964-72 A-body, Chevelle, Skylark, GTO, Cutlass 1967-69 F-body, Camaro, Firebird 1968-74 X-body, Nova, Ventura, Apollo, Omega 1970-81 F-body, Camaro, Firebird 1973-77 A-body, Chevelle, Lemans, Cutlass, Century 1964-72 Elcamino, 73-77 Elcamino 1970-72 Monte Carlo, 69-72 Grand Prix