Dent Repair


See larger image

Additional Images:

Neiko 20709A Heavy Duty Auto Body Hammer and Dolly Set, 7 Piece | Repair Kit for Dents (Tools & Home Improvement)

Hammer made with durable casting steel, with fiberglass handles. Includes curved dolly, utility dolly , double end hand dolly.

List Price: $22.85 USD
New From: $22.85 USD In Stock


See larger image

Additional Images:





AI 92pcs Car Body Paintless Dent Repair Removal Tools, Auto Dent Puller Kit Automotive Door Ding Dent Silde Hammer Glue Puller Repair Starter Set Kits For Car Hail Damage And Door Dings Repair

Anyyion Paintless Dent Removal Tools –A trustworthy brand in PDR Tools

Instructions(The frist way)
Suit for all larger size dent
1.Clean damage surface with a clean cloth;
2.Slide one sticks of glue into the glue gun and pre-heat hot glue for 5-10mins;
3.Match the glue tabs with the size of dent ,largest dents require the large tabs;
4.Hold it in dent with light pressure (about 1-2min)when sticks it;
5.Use the slide hammer to pull out the glue tabs;
6.Check with a reflector board. If dent still exists, knock it slightly with a rubber hammer or knockdown Repeat process until damage is remover;
7.Peel off the glue and clean the surface.

Instructions:(The Second way)
Suit for small dent size (within 4cm)
Hot Glue Sticks+ Glue Gun+ Glue Tabs +Golden Dent Lifter
1.Clean damage surface with a clean cloth;
2.Slide one sticks of glue into the glue gun and pre-heat hot glue for 5-10mins;
3.Match the glue tabs with the size of dent,largest dents require the large tabs;
4.Hold it in dent with light pressure (about 1-2min)when sticks it;
5.Use the Golden Dent Lifter to pull tabs out.(Note: push it slowly and lightly for several times);

Product list:
1 pcs Glue Gun
1 pcs Bridge Board
1 pcs Gold Dent Lifter
1 pcs LED Refletor Board
1 pcs Red Mini T Bar
9 pcs Metal Tap Down with 9 Heads
1 pcs Mini Bag for Metal Tap Down with 9 Heads
5 pcs Black Tap Down 
1 pcs Mini Bag for Black Tap Down 
10 pcs Glue Sticks
1 pcs Aluminum Hammer
1 pcs Rubber hammer
1 pcs Clean Cloths(Length:30 x 30 cm);
1 pcs T Bar Tool
52 pcs Glue Tabs
1 pcs Mini Bag for Glue Tabs
1 pcs Alcohol Bottle (emptoy)
2 pcs Plastic shovel
1 pcs Tool Bag(Length:35 x22 x24 cm);


List Price: Price Not Listed
New From: 0 Out of Stock

GearWrench 82302 7 Piece Body Tool Set (Tools & Home Improvement)

GearWrench introduced the original patented five-degree ratcheting wrench in 1996 and quickly became a go-to brand for professional automotive technicians. The innovation didn’t stop there. Year after year, the GearWrench brand continues to expand its line-in ratcheting tools and beyond-to help automotive and industrial technicians get their jobs done faster and easier. Set contains: Smooth Faced Bumping Hammer w/Square & Round Face, Smooth Faced Cross Chisel Hammer, Cross Faced Shrinking Hammer, Wedge Dolly, General Purpose Dolly, Toe Dolly, Heel Dolly.

List Price: $87.99 USD
New From: $87.99 USD In Stock

Best Choice 12-Piece Heavy Duty Punch and Cold Chisel Set with Roll-up Storage Pouch | Assortment of Pin Punch, Tapered Punch, Center Punch and Cold Chisel (Misc.)

EFFICERE 12-Piece Heavy Duty Punch and Cold Chisel Set contains a versatile selection of the most commonly used types & sizes of punches and chisels, and comes with a canvas roll-up pouch for easy organization and convenient storage. From mechanical, metal, machine and assembly works to automotive and firearms applications, this classic all-purpose assortment is what you need at home, garage, shop and other job sites to accomplish lots of projects, maintenance and repairs. Constructed from high strength drop forged and hardened chrome vanadium steel with a rust-preventative coating, these punches are built to last. All the tips and blades are precisely machined and processed through high-frequency heat treatment to multiply strength and provide excellent, consistent performance. Pin and tapered punches loosen broken fasteners, driver out or insert solid pins, and align parts for quick assembly. Center punches create a starting hole on work surfaces to prevent drill bits from wandering. Cold chisels remove frozen objects, cut broken or rusted fasteners, and clean off slag for multiple materials. Set includes: (1) Pin Punch: 3/8 x 8 in.; (3) Tapered Punches: 1/8 x 6 in., 3/16 x 10 in., 3/8 x 10 in.; (2) Center Punches: 1/8 x 6 in., 1/4 x 8 in.; (6) Cold Chisels: 1/2 x 7 in., 5/8 x 7 in., 3/4 x 8 in., 13/16 x 8 in., 7/8 x 10 in., 1 in. x 10 in.

List Price: Price Not Listed
New From: 0 Out of Stock

Craftsman 9-38464 12-Ounce Ball Pein Hammer (Tools & Home Improvement)

This tool is a great addition to your tool collection. Use when striking chisels and punches, peining rivets and shaping unhardened metal. Hammer face and pein are machined for uniformity and feature a 12-Inch hickory handle, and drop-forged, heat-treated steel heads for strength.

List Price: $15.99 USD
New From: $15.99 USD In Stock


See larger image

Additional Images:



Flexzion Fender Lip Roller Wheel Arch Rolling Extending Flaring Reforming Former Repair Upgrade Install Tire DIY Tool Adjustable DamageProof for Home Use or Auto Body Shop (Misc.)

Fender roller is one of the most common tools in the auto repair industry. It is perfect for rolling your vehicles fenders, increasing the clearance between your tire and fender, or repair wheel arch collision damage. Fender rollers are commonly used for rolling fenders on lowered vehicles for better clearance on aftermarket rims and wider tires. Fender-Rolling extending kit won’t let your fender ruin expensive tires on lowered vehicles use the roller to easily and quickly roll the entire inner lip on a wheel opening to increase fender/tire clearance. Increases clearance between tire and fender, flares fenders, and repairs wheel-arch collision damage 2-3/4″ Roller 12″ to 18″ Extend Bar. The body is made of iron which possesses of excellent hardness. The fully adjustable arm allows you to pull or push gradually. This fender roller is easy to face variety of needs and is the perfect choice for your vehicle fender repairing.

Specification:

  • Roller Size: 2-5/8″
  • Roller Width: 3-1/8″
  • Minimum Length: 14″
  • Maximum Length: 22-3/4″

Package Content:

  • 1x Fender Roller Tool

List Price: $79.99 USD
New From: $79.99 USD In Stock


See larger image

Additional Images:





AUTOPDR Pops a Dent 2 in1 Big Dent Puller Kits Auto Body Paintless Dent Repair Removal Remover Tools Kit Silde Hammer T Bar Tools with 17 Pcs Glue PDR Tap Down (Kitchen)

Silde Puller 2 in 1 Den T Bar Tools as assistant tools , for some CAR DENT which is regular .
Easy to used ,well a DIY pdr kits for small and regular dent damage.
USE pulling tabs and silde pulller can quickly repair auto-body dents.
Product list:
1 pcs dent puller
12 pcs black dent tabs
5pcs blue dent tabs
Noted:This dent repair kit work with glue glun and glue sticks together(packing list excluding the glue glun and glue sticks)

List Price: $56.98 USD
New From: $56.98 USD In Stock


See larger image

Additional Images:





Paintless Dent Repair Tools Kit – Grip PRO Slide Hammer with 24pcs Dent Removal Pulling Tabs Car Dent Repair Tools for Vehicle SUV Car Auto Body Hail Damage Remover

Description:
This PDR T-Bar puller is a lightweight glue tab pulling tool, meant to be used when repairing pressure dents and any dent that isn’t sharp or creased.
The tension puller works well with a tap down hammer when pulling large dents.
It’s very easy to control, everyone can removal the dent easily by yourself.

Specifications:
Color: Silver Grip PRO Slide Hammer + Blue Dent Removal Pulling Tabs +Black Glue Sticks+ Yellow Hot Melt Glue Gun
Type: PDR tool set
Package Weight: 1500g
Function: Paintless dent removal

How to use:

1.Clean the dent with a clean wet cloth;
2.Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into
the glue gun, connect the power source and preheat for 5 minutes;
3.Use a proper drawing gasket. Large dent requires a large drawing gasket.
4. Pull the trigger and apply the drawing gasket with extruded glue;
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres;
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;
8. Clean the repaired place with a clean wet cloth.

Packing lncluded:

24x PDR Glue Pulling Tabs
1x 2 in 1 Dent Removel T Bar Tools
1x100W Hot Melt Glue Gun( flash heating-1 min)
5xBlack Glue sticks
2 x Plastic Glue Scraper
1x cloth

Tips:

Prep glue pulling tabs by soaking them in 91% rubbing alcohol and drying them before first use. Make it not easy to break


List Price: $56.99 USD
New From: $56.99 USD In Stock

Yoohe Black Aluminum Suction Cup Dent Puller Handle Lifter – Dent Remover Heavy Duty Galss Lifting

Yoohe Black Aluminum Suction Cup Puller Handle Lifter

The suction cup lifter features a single stroke pump action for convenience, durable aluminum handles and an impact-resistant housing to withstand work site abuse.

No chemicals or other toxic material are used in this process,it is 100% environmental friendly.

This handle suction cup lifter is a great dent puller as well as the ideal tool for moving flat objects in any home garage or professional body shop!

Repair Steps:

Step 1:Adjust the handle to the separate state

Step 2:Place the Black suction cup on the surface of the item

Step 3:Press the suction cup vertically downwards,and then take advantage of suction cup handle(to lift the item)

Specifications:

–Color:Black
–Diameter :4.72in
–G.W:0.585kgs
–N.W:0.520kgs
–MEAS:5.31*5.12*4.72in
–Material: Aluminum Alloy and Rubber
Packing List:

1 x Suction Cup Lifter/Glass Puller


List Price: $12.99 USD
New From: $12.99 USD In Stock


See larger image

Additional Images:




IMT Vacuum Suction Cup Glass Lifter 4.5″ Car Dent Puller, Vacuum Lifter for Glass/Tiles/Mirror/Granite Lifting, Gripper Sucker Plate, Double Handle Locking (Misc.)

IMT proudly offers you the line of Vacuum Suction Cups, we are specialized in manufacturing glass tools for about 30 years, we are committed to providing high-quality products and services to our customers throughout the world and offer you factory’s direct sale price.

The IMT E000 4.5-Inch lightweight vacuum suction cup provides sturdy, reliable hold for accurately moving and positioning glass panels, cladding materials, metals, ceramics, household appliances and office furniture. which reduces the risk of injury by manually handling awkward loads. It also can be used to remove certain dents of your vehicles. it’a useful tool that everyone should own.

Specifications:

Cup Diameter: 4.5″ (115 mm)

Material: Durable Plastic, Rubber

Maximum Horizontal Suction: 130lb

Maximum Vertical Suction: 110lb

Safe Load Capacity: 45lb

Package Includes:

1 x 4.5″ Vacuum Suction Cup

1 x Manual Instruction

Instructions for remove a dent:

Place the dent puller so that the middle of the suction cup is in the middle of the dent. 

Press the puller into the dent with even pressure. The suction cup should be almost flat against the dent.

Push the handles together to lock the dent puller in place.

Pull the dent puller with slow but even force, making sure not to twist the suction cup. 

Notes: 

When dealing with car dent, only for the flat surface, not for the curved surface

The area of the dent needs to be larger than the dent puller

Any material or load being lifted by a Vacu-Lifter or Suction Cup Lifter should be clean, dry, and free from oil, dirt, and scratches.

Store the cup in clean, dry condition.

Warranty

This warranty is valid for 12 months from the date of purchase. If problems arise due to material defects or improper assembly during this period, it will be replaced free of charge.


List Price: $25.90 USD
New From: $25.90 USD In Stock


See larger image

Additional Images:




See larger image

Additional Images:




Mookis PDR Rods Dent Repair Tools Paintless Dent Removal Puller Sets for Car Hail Damage Door Dings Repair (6 Pieces)

Mookis® Auto PDR Paintless Dent Repair Spring Steel Push Rods Hail Ding Removal Tool Set

About Mookis:

Mookis is one of the most professional Paintless Dent Removal Tools manufactures. Except these PDR Rods tools, we also sell many other car dent remover tools such as Dent Lifter Suction Cup,Slide Hammer,Pops-a-dent Bridge puller, LED line Board, Tap Down tools,Glue Gun,Hot Glue Sticks and dent removal machine.

How to use our PDR Rods set:

1.First use the light reflector board to detect the deformation.This process helps you properly push up the metal.

2.Then use the metal rods(choose one tip shape that fit most) to move dents outward from the inside or from under the panel.

❤Not every one can do the work well,so we suggest these tools be used by people with PDR skill experiences.

Package included:

6 * PDR Push Rods (C-1, C-2, C-3, C-4, C-5, C-6)


List Price: $54.99 USD
New From: $54.99 USD In Stock

13PC Heavy Duty Dent Puller w/10lbs Slide Hammer Auto Body Truck Repair Tool Kit (Misc.)

Description:
10 LBS Malleable slide hammer kit

Great for auto body repair

Slide weight: 10LBS

Solid steel shaft with knurled handle for sure grip

Drop forged, steel hooks, pullers and attachments

Slide pole length: 22-3/4″

Slide pole diameter: 3/4″

Completed kit

1 Handle

Washer

5 Pc hasp iron

Long tube hasp iron

Cast iron hammer

Right angle flat steel

Hex taping adaptor

Hex taping screw holder

Taping screw

Connector hasp iron

Double barreled connector

Blow molded case (CASE IS MADE OF PVC, NOT STEEL or heavy METAL . so this can get dent or crack during shipping)

Perfect for home and business

Heavy duty puller works on most cars and trucks

THE CASE MAY BE DAMAGED OR CRACKED DURING SHIPPING

About Shipment:

Our products ship from several warehouses located throughout the country, which allows us to provide the quickest possible delivery to our customers.

Since orders are processed immediately after payment and ship very quickly, orders cannot be canceled after checkout.

We do not ship to AK, HI, PO boxes, APO addresses, or freight forwarders.

About Shipment:

Our products ship from several warehouses located throughout the country, which allows us to provide the quickest possible delivery to our customers.

Since orders are processed immediately after payment and ship very quickly, orders cannot be canceled after checkout.

We do not ship to AK, HI, PO boxes, APO addresses, or freight forwarders.


List Price: 0
New From: $39.99 USD In Stock


See larger image

Additional Images:




F2C 10 Ton Capacity Porta Power Hydraulic Bottle Jack ram Pump Auto Body Frame Repair Tool Kit Power Set Auto Tool for Automotive, Truck, Farm and Heavy Equipment/Construction

Note before operation:
Pls be sure to exhaust the gas inside first and check whether the two valve ports connected to the accessories are aligned or not.
Attached are video links for your reference.
https://www.youtube.com/watch?v=4RyxxIznnQk&list=UUBE6Abn0GSR1SNop_S8Ff0g
https://www.youtube.com/watch?v=u8fLbfaSwhk&list=UUBE6Abn0GSR1SNop_S8Ff0g&index=3
https://www.youtube.com/watch?v=w8b6f52KjWc&index=2&list=UUBE6Abn0GSR1SNop_S8Ff0g

Item Specifications:
Color: red
Size:32″x17″x6.5″ / 815mm*430mm*165mm
N.W.:68lb / 31kg
G.W.:73lb / 33kg
Load Capacity: 10 tons
Jack Power Type: Hydraulic
Max Lifting Height: 130 mm
Cylinder Min Height:330 mm
Working Pressure: 62 Mpa
Oil Be Filled: 500 g

For Load:
Maximum load can not exceed the rated capacity
The load can not exceed the half of the capacity when all tubes used.
The extension of the piston can not exceed the stroke.

For Safety:
Working oil:No 10
Check the level of oil,if it is not sufficient,please add the same hydraulic oil.
After using,close the valve with the cover,to keep the oil free from the dust and dirt.
Before lifting,adjust the jack slowly to make the load coaxial with resnect to jack.
Tube can not be bent,near to the catting tools and fires,also can not put te weight on it.


List Price: $299.95 USD
New From: $299.95 USD In Stock

2-way Frame Back 3 Ton Self-tightenin​g Grips & Auto Body Repair Pull Clamp

Self-tightening serrated jaws for a positive grip Both sides jaws are different in order to fit the confinedroom Two way pulling: straight and top Drop forged chrome molybdemum construction provides morestrength, pulling power and greater wear resistance Capacity: 3 tons (straight pulling), 2 tons (top pulling) Gripping width: 1-3/8″ (35mm) Overall length: 8-3/4″ (225mm)

List Price: $21.24 USD
New From: $21.24 USD In Stock


See larger image

Additional Images:

Biltek 5 Ton Clamp Self-Tightening Frame Body Repair Small Mouth Pull Clamp 10,000lbs (Automotive)

NEW 5 Ton Clamp Self-tightening Frame & Body Repair Small Mouth Pull Clamp

Features:

  • Self-tightening Clamp Grips Tighter as it is Pulled
  • 5 Ton Capacity, thats 10,000 Pounds!
  • Minimum of 1-1/2″ Reach-around for Flanges, Cowls, Pinch Welds, and Lips
  • Compact and Lightweight for Pulling from Many Places

Specifications:

  • Capacity: 5 Tons (10,000lbs)
  • Condition: 100% Brand New

Package Includes:

  • 1x 5 Ton Self-tightening Clamp
  • Instructions not included

List Price: $64.99 USD
New From: $64.99 USD In Stock


See larger image

Additional Images:

5 Ton 2 Way Auto Body Repair Pulling Pull Clamp


List Price: $26.91 USD
New From: $26.91 USD In Stock

5 TON 2 WAY FRAME BACK RACK CLAMP H – D REPAIR DENT PULLER CHASSIS STRAIGHTENERS

5 TON 2 WAY FRAME BACK RACK CLAMP H – D REPAIR DENT PULLER CHASSIS STRAIGHTENERS

This Item Features:

-5 TON 2 WAY FRAME BACK RACK CLAMP H – D REPAIR DENT PULLER CHASSIS STRAIGHTENERS


-Use the hook to pull and fix the car.


-This tool could be cliped to unibody or any other place of the body.


-Two-way pull operation.


-The special puller design used with steel makes it hard to be broken.


-Suitable for use with bodyshop repair kits and chassis straighteners.


-Capacity:5 ton (Straight way) and 3 Ton (Cross way)


-Mouth Opening aprox 5/8″ (17mm)


-Bolt Size 9/16″(14mm) x 2-3/4 ” (70mm)


List Price: $41.04 USD
New From: $41.04 USD In Stock


See larger image

Additional Images:

Performance Tool W2029DB Dent And Seal Puller Set, 9-Piece (Tools & Home Improvement)

Wilmar W2029DB 9-Piece Dent And Seal Puller Set. Contains slide hammer puller with black oxide finish to resist corrosion and multiple attachments for various applications. Excellent for pulling oil seals as well as other seal types. Makes all types of auto body repairs possible with assorted pulling attachments, great for the professional or the do it yourselfer.

List Price: $44.99 USD
New From: $36.62 USD In Stock

Jackco 10 Ton Auto Body Frame Straightener – Swivel Type

Includes: 1 – Frame Assembly 1 – Multi-Position Anchor Post 1 – 10 Ton 6″ Stroke Ram 1 – Manual Pump 2 – Pull Rings 2 – Pull Clamps 2 – 6 ft. Chains with Hooks 2 – Support Stand 1 – Cross-Tube 2 – Underbody Support Clamps Shipping Weight: 518 lbs.

List Price: $1,549.99 USD
New From: $1,549.99 USD In Stock


See larger image

Additional Images:

Titan Tools 22400 12.5A 120-Volt Heat Gun (Automotive)

12.5 Amps 120V Heat GunIdeal for plastic welding shrink tubing and paint strippingDual temperature settingTemperature: Low Setting: 572 degrees, High Setting: 932 degrees

List Price: $20.83 USD
New From: $20.83 USD In Stock

Astro 9425 Dual Temperature Heat Gun Kit (Automotive)

The Astro Pneumatic 9425 Dual Temperature Heat Gun Kit is the ideal tool for stripping paint, removing decals, strips, shrinking wire wrap, etc. The unit has a switch which allows for two different heat settings (572DegreeF and 932DegreeF). This tool has double insulation for extra safety, and a blow molded case for easy storage and transport. It is constructed with a low noise/vibration design, and is extremely lightweight for user comfort. The kit comes with 1pc Dual Temperature Heat Gun, 1pc Large Deflector Nozzle, 1pc Reduction Nozzle, 1pc Small Deflector Nozzle, and 1pc Reflector Nozzle. This tool meets IEC standards and has GS, CE, EMS, CSA, and UL certifications. Specifications: Voltage: 120V, 60Hz Amperage: 12.5A Weight: 3.1lbs 2 Heat Setting: Low Heat: 572DegreeF (300DegreeC) High Heat: 932DegreeF (500DegreeC) Air Volume: Low Heat: 10 cfm (280L/min) High Heat: 17 cfm (480 L/min) Wattage: Low Heat: 1000W High Heat: 1500W

List Price: $23.02 USD
New From: $21.99 USD In Stock

Dust-Off Disposable Compressed Gas Duster, 10 oz Cans, 2 Pack (Office Product)

Dust-Off Disposable Compressed Gas Duster, 10 oz Cans, 2 Pack

List Price: $13.59 USD
New From: $12.84 USD In Stock


See larger image

Additional Images:

H & S Autoshot 4550 Starter Plus Stud Welder Kit (Automotive)

New and improved, the Starter Kit Plus has Stud Ease technology which holds stud in welder for easy out of position welding. Welds studs easier and faster. Includes package of 500 flexport welding studs. Comes with a 2 year limited warranty and lifetime transformer warranty.

List Price: $193.95 USD
New From: $193.95 USD In Stock


See larger image

Additional Images:

Steck Manufacturing 20014 Stud Lever (Automotive)

Quickly grip studs (pull pins) and controlling the dent pulling process as well as accuracy of the pull. Value Proposition: Strong reinforced Nylon lever with pivoting base and self-locking stud capture mechanism allows the technician to quickly lock and lever studs while also compressing the crown area of the dent with the pivoting base. Adjustable pivot base on the Stud Lever allows one-handed operation and provides increased leverage, accuracy and reach for the pull and crown compression processes both vertical and horizontal, including roofs and lower rocker panels. Stud Lever’s unique stud capture mechanism allows technician to quickly and easily capture both 2.2mm and 2.6mm studs as close as 3/8 inches apart. Included with the Stud Lever is the Steck Straight Edge, STK- 20003, which allows the technician to align the stud pull with the non-damaged metal area for accurate pulls on the initial pull which minimizes metal work and reduces the need for slide hammers.

List Price: $40.19 USD
New From: $39.97 USD In Stock


See larger image

Additional Images:

H & S Auto Shot 1095 Puller (Automotive)

Unique design securely grips and releases stud with quick-release cam Allows you to feel the pull Eliminates overpulling One handed operation

List Price: $43.97 USD
New From: $43.65 USD In Stock

Stud Buddy 13226 – Stud Puller And Dent Repair Tool (Formerly UNI-7600)

Stud Buddy is absolutely the best addition to any auto body technician’s tool box. Faster and easier to use than any other stud puller in the markrt, Stud Buddy will complete your existing stud welder kit. Amazingly simple and effective, this pantented tool gives you all the control and power you need to finish your repair and do it right the first time. No more struggling, no more second guessing with slide hammer. It is even easier than 1-2-3; it’s one and done! This is why it is ” SIMPLY A BETTER TOOL”.

List Price: $54.95 USD
New From: $54.95 USD In Stock


See larger image

Additional Images:



Motor Guard JO1050 Magna-Spot Entry-Plus Studwelder Kit (Tools & Home Improvement)

Motor Guard Magna-Spot Stud Welder Kit – The Ultimate Dent Removal Tool – Made in the USA. The Motor Guard Magna-Spot Stud Welder Kit incorporates our exclusive Low-Heat technology, designed for today’s high-strength steel unibody vehicles. With plenty of power for any job, these welders virtually eliminate ‘burn-through’, a common problem associated with other models. Available in seven custom kits, each Magna-Spot system comes complete with a welder, a slide hammer and a supply of draw pins in a handy storage box. A variety of power levels and accessories ensures that each kit contains the items needed for professional no-holes dent repair for every application. Every Motor Guard Magna-Spot Welder now features our exclusive Magna Pin System (MPS) which provides a convenient and secure holder for pins both on the case and in the electrode tip. Once you use a Motor Guard Magna-Spot Welder, you will not do a repair without it. Made in the U.S.A.. Five Year Warranty..

List Price: $199.99 USD
New From: $199.99 USD In Stock

Stud Welder Dent Repair Kit (Misc.)

Everything you need to repair body dents or dings without drilling. Kit comes with stud welder gun, 2 lb. slide hammer, 200 studs (100 each: 2mm and 3mm), and two nozzles (2mm and 3mm).

Weight: 16.55 lbs.


List Price: $137.00 USD
New From: $137.00 USD In Stock

Motor Guard J20014 Magna Draw Pins, 2mm, 500-Pack (Tools & Home Improvement)

Motor Guard Magna-Spot Draw Pins made of copper-coated steel are soft for easy flexing and grinding but deliver a 500 lb. pull. Packaged in a convenient, re-closable clamshell package. For use on all brands of stud welders.

List Price: $18.97 USD
New From: $18.53 USD In Stock

Motor Guard J20006 Shrinking Electrode for Magna-Spot Stud Welders (Tools & Home Improvement)

Replacement Shrinking Electrode fits all Motor Guard Magna-Spot Studwelders. The Magna-Spot series welders incorporate a new low-heat transformer especially designed for today’s high-strength steel uni-body vehicles. With plenty of power for any job, these welders virtually eliminate “Burn-Through” that can be a problem common to other welders.

List Price: $18.77 USD
New From: $18.77 USD In Stock

Motor Guard J20009 Trim Rivet Electrode for Magna-Spot Stud Welders (Tools & Home Improvement)

Replacement Trim Rivet Electrode fits all Motor Guard Magna-Spot Studwelders. The Magna-Spot series welders incorporate a new low-heat transformer especially designed for today’s high-strength steel uni-body vehicles. With plenty of power for any job, these welders virtually eliminate “Burn-Through” that can be a problem common to other welders.

List Price: $26.90 USD
New From: $26.90 USD In Stock


See larger image

Additional Images:

Motor Guard J20012 Magna Trim Rivets, 500-Pack (Tools & Home Improvement)

Copper-coated steel rivets, weld to body panel to replace OEM clips for metal trim strips and window trim. A restoration requirement.

List Price: $22.80 USD
New From: $22.80 USD In Stock

Mangocore 12pcs/lot 11mmx190mm DIY Hot Melt Glue Sticks Black color For Hot Melt Gun Car Audio Craft General Purpose (Office Product)

Product description:
Colored: Black
Shaped: Stick
Solidify time: 10-20 seconds
Material: synthetic resin
Size: 190mm(L) x 11mm(Diameter)
Soft point:±80°c
Resistant temperature: 85 degrees
Cold resistance: -40 degrees
Package Includes:
12 x Hot Melt Glue Sticks

List Price: Price Not Listed
New From: 0 Out of Stock


See larger image

Additional Images:




Car Repair Equipments – Car Dent Repair Yellow Glue Stick 270mm Traceless Suitable For All The Cars – Car Dent Repair Kit Tools Tool Puller Paintless Removal Glue Sticks Pops – Pdr – 1PCs (Misc.)

Feature:
1.Simple operation, repair the dent quickly.
2.Paintless repairing, does not damage the original paint.
3.Different sizes of traction pads.for the dent of all sizes.
4.Suitable for the surface of car, metal plate, refrigerator, washing machine and soon.
5.The images may exist chromatism, the color is yellow, please focus on actual received goods.
Specifications.
Color: Yellow
Function: repair tools
Size: 27cm
Diameter: 11cm
Quantity: two
Package Included:
2 X Car Repair Glue Stick

List Price: $8.28 USD
New From: $8.28 USD In Stock

Paintless Dent Repair (PDR) Glue Sticks – Red 10 pack by KECO

Professional grade PDR glue for use with dent repair tabs;Red;10 pack

List Price: $83.32 USD
New From: $83.32 USD In Stock


See larger image

Additional Images:



Pdr Glue Sticks , Gliston Hot Glue Sticks Paintless Dent Repair Tool for Car Repair Dent Remover Tool Set – 5 Packs Black & 5 Pack Yellow (Toy)

Looking for a environmental, professional PDR Glue Sticks ? Then look no further…

– Gliston is one the top professional Paintless Dent Removal Tools manufacturers, production line covers on Auto Dent ,Pop a Dent Kit, Pro Hot Melt Glue Sticks, Reflector Board, PDR Glue Tabs, Knockdown Hammers, as well as other series PDR accessories for auto dent repair application.

– Pro Glue Sticks : made of pro environmental material ,which is anti-aging, wide practical, fast bonding, fresh smell, good thermal stability .

Warning:

These Glue Sticks’s Best Melt Time is 5-8 Minutes for 100w Glue Gun, Adhesive Cooling Time about 2 Minutes is the best Working Time in Glue Tabs for Car Dent Repair

Yellow Color Glue Sticks is a Better Strong Viscosity,Suitable for Relatively Harder Parts on Cars,Black Color Glue Sticks is Suit for Relatively Soft on Car

— Our Guarantee —

We personally guarantee our products are made to the highest standards.

We OFFER :FULL 100% MANUFACTURER MONEY BACK GUARANTEE – If you find any issues in this products, or any of our products, please contact our Amazon Prime Service Customer Support line and we’ll offer you a free replacement or a full refund

Packing list:
5 x Black Glue Sticks
5 x Yellow Glue Sticks

what you waiting for? Click the add to cart button now

to get this auto body dent repair tools kits on its way to your door.


List Price: $11.89 USD
New From: $11.89 USD In Stock


See larger image

Additional Images:





GS 10pcs Car Body Paintless Dent Removal Tools Aluminum Dent Hammer With Knock Down Head Tap Down Tools Set PDR Dent Repair Kit

Package Include:
1pc Aluminum hammer
9pcs Tap Down tools

List Price: $17.99 USD
New From: $17.99 USD In Stock


See larger image

Additional Images:





Qiilu PDR Tools Dent Ding Hammer 9 Heads Tap Down Kit Knockdown Tool Paintless Hail Removal (Automotive)

Features:

1. Repair pen with 9 different specifications of the head.
2. Small and exquisite, use of the top rubber joints, lightweight and convenient, high strength, wear, fatigue.
3. By rabber hammer can quickly repair auto-body dents.
4. It can be used on any car, or any color, and simple to apply.

5. Dent Hammer is used by PDR technicians with punches to tap down high spots.
6. It is also used to make practice dents when learning the art of paintless dent removal.

Specifications:

Material: Metal+ Rubber
Size: 25.5 x 7 x 2 cm / 10″ x 2.7″ x 0.8″ approx.
Color: As the pictures show

Package Included:

1x dent ding hammer

1x tap down pen with 9 heads

Note:

1. Please allow 1-3mm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.


List Price: $18.99 USD
New From: $18.99 USD In Stock

Comments are closed