Everything Glass

Tool Aid SG 87900 Windshield Removal Tool (Automotive)

Use to remove windshields, backlights and bonded backlights on General Motors and Chrysler vehicles. This tool cuts the adhesive caulking compound around windows with special tempered steel blades. Make windshield removal an ease with this tool!

List Price:$16.49 USD
New From:$16.47 USD In Stock
buy now


See larger image

Additional Images:Img - B012FNNQKA
Img - B012FNNQKA
Img - B012FNNQKA
Img - B012FNNQKA
Img - B012FNNQKA
Img - B012FNNQKA

8MILELAKE 7pc Classic Vintage Car Molded Windscreen Removal Tool Set (Misc.)

Heavy duty Windshield removal tool kit
Kit includes:
1. Wire: Three strong galvanised steel wires braided to form one wire.
2. 2 x Wire gripping handles: Feed the wire through the hole in the wedge shaft. Loop it through the hole at the top of the shaft. Then back into the handle. Pressing the wedge back into the handle, the wire is held.
3. Windshield removal tool: Cuts the vinyl adhesive compound around the windshield.
4. Wire feeder tool: Designed for easy and flexible insertion of wire through polyurethane, allowing speedy removal of bonded windshield.
5. Trim pad remover: Place the tool under the edge of the door upholstery panel and insert it into the fastener as far as possible, then simply pry up.

List Price:$19.59 USD
New From:$19.59 USD In Stock
buy now


See larger image

Additional Images:Img - B001PBQ9K8

FastCap HOD-DOUBLE Handle On Demand (Tools & Home Improvement)

FastCap HOD-DOUBLE Handle On Demand

List Price:$14.69 USD
New From:$12.38 USD In Stock
buy now


See larger image

Additional Images:Img - B005EE2GCM
Img - B005EE2GCM
Img - B005EE2GCM

DAMO 8″ Vacuum Suction Cup Heavy Duty Glass Lifter Suction Cups with ABS Handle and Hand Pump for Glass & Granite Lifting (Sports)

Product Description:
Use the cup on clean, relatively smooth, nonporous surfaces, at temperatures from 10 to 120 Fahrenheit. Moisture or contaminants can reduce the slip resistance of the cup. The red-line indicator may not perform reliably at elevations above 5000 feet.

To Attach
1) Position the hand cup on the contact surface so the red line will be visible if it should appear while lifting the load. CAUTION: Test the cup for staining or deformation of load surfaces with light colors or soft coatings.
2) Pump the plunger until the cup attaches completely. When the red line is hidden, vacuum is sufficient for lifting.
3) Check the plunger frequently to make sure the cup remains securely attached. If the red line appears while lifting, set down the load immediately and pump the plunger until the red line is hidden again.

To Release
1) Set the load on a secure support.
2) Press the valve release lever until the cup disengages completely.

Maintenance
Since aging and wear reduce the capacity of the rubber pad, it should be replaced at least once every 2 years or whenever cuts, slits or other surface damage is discovered. Always inspect vacuum pads before use. Clean vacuum pads and the load surface between each lift. Make sure both surfaces are dry and no dirt or obstruction. Make sure plunger has enough lubrication for pump.

Warning:
Do not use suction cup for climbing nor pull up.

Damo Diamond Tools, LLC is not responsible for any personal injuries and property damages due to incorrect usage of our products according to our Instructions.


List Price:$45.90 USD
New From:$45.90 USD In Stock
buy now


See larger image

Additional Images:Img - B06XYYRTZS
Img - B06XYYRTZS
Img - B06XYYRTZS
Img - B06XYYRTZS
Img - B06XYYRTZS
Img - B06XYYRTZS

IMT Vacuum Suction Cup Glass Lifter 5″, Vacuum Lifter for Glass/Tiles/Mirror/Granite Lifting, Gripper Sucker Plate, Double Handle Locking (Misc.)

IMT proudly offers you the line of Vacuum Suction Cups, we are specialized in manufacturing glass tools for about 30 years, we are committed to providing high-quality products and services to our customers throughout the world and offer you factory’s direct sale price.

The IMT E000 5 Inch lightweight vacuum suction cup provides sturdy, reliable hold for accurately moving and positioning glass panels, cladding materials, metals, ceramics, household appliances and office furniture. which reduces the risk of injury by manually handling awkward loads. It also can be used to remove certain dents of your vehicles. it’s an useful tool that everyone should own.

Specifications:

Cup Diameter: 5″ (115 mm)

Material: Durable Plastic, Rubber

Maximum Horizontal Suction: 130lb

Maximum Vertical Suction: 110lb

Safe Load Capacity: 45lb

Package Includes:

1 x 5″ Vacuum Suction Cup

1 x Manual Instruction

Instructions for remove a dent:

Place the dent puller so that the middle of the suction cup is in the middle of the dent. 

Press the puller into the dent with even pressure. The suction cup should be almost flat against the dent.

Push the handles together to lock the dent puller in place.

Pull the dent puller with slow but even force, making sure not to twist the suction cup. 

Notes: 

When dealing with car dent, only for the flat surface, not for the curved surface

The area of the dent needs to be larger than the dent puller

Any material or load being lifted by a Vacu-Lifter or Suction Cup Lifter should be clean, dry, and free from oil, dirt, and scratches.

Store the cup in clean, dry condition.

Warranty

This warranty is valid for 12 months from the date of purchase. If problems arise due to material defects or improper assembly during this period, it will be replaced free of charge.


List Price:$25.90 USD
New From:$25.90 USD In Stock
buy now


See larger image

Additional Images:Img - B076S6KLYM
Img - B076S6KLYM
Img - B076S6KLYM
Img - B076S6KLYM
Img - B076S6KLYM
Img - B076S6KLYM

BOUSH Windshield Removal Tool Kit Windshield Repair Kit Car Windscreen Cold Knife Quick Release Auto Window Glass Remove (Tool Set)

This automotive cold knife tool is essential for any mechanic or car enthusiast for quick and easy windshield removal! Save a ton of money.

Product name: Cold knife car windshield removal tool kit
Color: metalic red
Material: durable metal
Package content: 1 straight bar + 1 pull handle + 3 cut blades + 2 sealant scrapers

How to remove windshields:
(1)After removing any moldings and trim, cut away excess urethane”squeeze-out” in the channel between the glass and body with a utility knife.
(2)Drop the cold knife into channel, then rotate it into the urethane below the glass, take some practice to get the right angle and strength.
(3)Hold the knife bar straight, and pull cord handle close to the glass edge, navigating carefully around corners.
(4)Cuts right through the window sealer and pull off your window that easy.
WARM TIPS:
If the band of urethane is wide, a longer cold knife blade may be necessary.
Heat up the adhesive with a heat gun or soften your vehicle’s urethane in the sun for a bit can get the knife to even move, easy to cut the urethane like butter.

How to quick change blades:
To exchange the blade within seconds, you just need to push down button on the knife bar, release the old blade, insert the new blade. Well down.
Warning: Please keep this tool out of the reach of Children, this is not a toy!


List Price:$39.99 USD
New From:$39.99 USD In Stock
buy now

Tool Aid S&G (87425) Windshield Cut-Out Wire, Golden (Automotive)

Braided design provides the fastest cutting action possible. Quickly slices through urethane and silicone windshield adhesives. Each braided helix of this wire acts like a cutting saw tooth. Made of stainless steel, 72 feet per hank. Wear eye protection and work gloves when using cut-out wire.

List Price:$9.80 USD
New From:$9.72 USD In Stock
buy now

Tool Aid S&G (87440) Windshield Cut-Out Wire Handle, Set of 2 (Automotive)

Features and Benefits: Securely and safely holds windshield cut-out wire up to .035; diameter Comfortable, contoured handles eliminate discomfort caused by wrapping wire around hands or a makeshift holder Holds braided or solid wire Handles enable cut-out wire to be pulled through adhesive with greater control and ease Wedge design securely holds wire in place Wire installs quickly and can easily be adjusted to different lengths. Specially designed to keep wire away from your hands and fingers.

List Price:$29.85 USD
New From:$24.46 USD In Stock
buy now


See larger image

Additional Images:Img - B005R3SPUC

Astro WINDKO ONYX Air Windshield Remover with 3-Piece Blade Set (Automotive)

Astro Pneumatic’s WINDKO ONYX Air Windshield Remover with 3pc. Blade Set includes a flexible blade mount which can be positioned in 12 different ways (at 30-Degree increments). It features a rear exhaust that directs air away from work and a sealant cutter that cuts around bonded and encapsulated glass. This set efficiently cleans and smoothes moldings after glass removal and features a teasing throttle and regulator to provide easy speed control. Blades included with tool:1pc. – WINDK-08E – 57mm Bent Blade, 1pc. – WINDK-08H – 52mm Bent Curved Blade and 1pc. – WINDK-08J – 35mm Flat-Nose Straight Blade.

List Price:$70.03 USD
New From:$70.03 USD In Stock
buy now

ATD Tools 8562 17″ Professional Urethane Cut-Out Knife (Automotive)

Extra reach to cut hardened urethane down to the dash line. 18″ long. Heavy-duty steel and aluminum construction. Use with standard utility razor blade. Ergonomic cushion grip handle.

List Price:$17.99 USD
New From:$17.99 USD In Stock
buy now


See larger image

Additional Images:Img - B01KT0VBCG

8MILELAKE 7pc Professional Windshield Removal Automotive Wind Glass Remover Tool Kit

Heavy duty Windshield removal tool kit
Kit includes:
1. Wire: Three strong galvanised steel wires braided to form one wire.
2. 2 x Wire gripping handles: Feed the wire through the hole in the wedge shaft. Loop it through the hole at the top of the shaft. Then back into the handle. Pressing the wedge back into the handle, the wire is held.
3. Windshield removal tool: Cuts the vinyl adhesive compound around the windshield.
4. Wire feeder tool: Designed for easy and flexible insertion of wire through polyurethane, allowing speedy removal of bonded windshield.
5. Trim pad remover: Place the tool under the edge of the door upholstery panel and insert it into the fastener as far as possible, then simply pry up.

List Price:$39.95 USD
New From:$39.95 USD In Stock
buy now


See larger image

Additional Images:Img - B06XV9XHBL
Img - B06XV9XHBL
Img - B06XV9XHBL
Img - B06XV9XHBL
Img - B06XV9XHBL
Img - B06XV9XHBL

Car Panel Removal Tools Kit 14 Pcs Auto Upholstery Tools,Strong Nylon Door Molding Dash Panel Trim Tool Kit & Clip Pliers for Car Panel Dash Audio Radio Removal Installer and Repair Pry Tool Kits

Perfect for Those Like to Work on Cars
– AYAOQIANG trim removal tool kit is designed for helping someone to get his interior work done in a short time.
– Featured super lightweight and handy size, these 13pcs prying tools are time and efforts saving that perfectly suitable for most interior and exterior car modification as well as bike tire removing!

Extra Portable Bag
– We offer a durable and easy-cleaned nylon storage bag to contain all trim tools in it.
– It folds up nicely and has velcros to keep tools orderly, making the entire set portable while moving to various occasions!

Tougher Trim Removal Tools
– Adopted impact resistant nylon fiber material, there is also a bit of flex in the trimming tools but they do not bend, which is hard enough to install or remove car audio system, dashboard, door grab handle, vent and other accessories.
– Coming with 2 sturdy fastener removers, one is 12.3″ long and the other is 8.8″ long, great for removing deeply-stapled and stubborn fasteners without any damages to your love car!

Package List:
14 x Auto Trim Removal Tools
1 x Portable Bag


List Price:$40.99 USD
New From:$40.99 USD In Stock
buy now


See larger image

Additional Images:Img - B06XV5CR6M
Img - B06XV5CR6M

iztor Windshield Wiper Arm Puller Removal Tool

Notice:
Please consider the suitable size of the wiper arms.
The size indication is on picture 2, please refer to it before purchasing.
Specification:
1. Removes wiper arms on many foreign and domestic cars and light trucks.
2. Not to damage wiper arm or hood cowling during removal.
3. Simply place puller feet under wiper arm and tighten forcing screw against wiper shaft.

List Price:Price Not Listed
New From:0 Out of Stock
buy now

uxcell Auto Car Black Nonslip T Handle Window Glass Wind-shield Remover Tool w Wire (Automotive)

Use to remove windshield on cars and trucks. Nonslip aluminum T shape handle, steel wire saw. Removal of rigidly-bonded automobile windows glasses, windshield glasses and back glasses.

List Price:$13.93 USD
New From:$13.93 USD In Stock
buy now


See larger image

Additional Images:Img - B0739L43Y3
Img - B0739L43Y3
Img - B0739L43Y3
Img - B0739L43Y3
Img - B0739L43Y3
Img - B0739L43Y3
Img - B0739L43Y3
Img - B0739L43Y3

Auto Door Clip Panel Trim Removal Tool Kits for Car Dash Radio Audio Installer Pry Tool 7Pcs (Electronics)

Made from High Quality Nylon Plastic construciton avoids scratching panels and leather interior Allows you to access under the trim to remove parts

List Price:Price Not Listed
New From:0 Out of Stock
buy now


See larger image

Additional Images:Img - B0067TIAM8

Windshield Removal Tool Set

14 Piece Windshield Removal Tool Set.  Includes all the necessary tools to remove most windshields. Great starter kit with quality anodized and knurled handles for optimum durability. 

Includes: 

1 Long Knife, 1 Regular Knife, 1 Pull Knife, 3 Pinch Weld Scrappers, 1 72 ft. Roll Urethane Cutting Wire, 2 Wire Handles, 1 Razor Blade Scrapper, 1 Cowling Removal Tool, 1 Double ended molding Release Tool, 1 Feeder Tool.


List Price:$149.00 USD
New From:$149.00 USD In Stock
buy now


See larger image

Additional Images:Img - B000RW1XCK
Img - B000RW1XCK

3M 08693 Auto Glass Urethane Windshield Adhesive Cartridge – 10.5 fl. oz. (Automotive)

3M8693 Features: -Windshield adhesive. -Medium viscosity, one part moisture curing urethane adhesive designed for windshield bonding and stationary glass attachment. -Exceeds OEM strengths. -Container volume 10.5 Fluid ounce. Dimensions: Overall Product Weight: -11.6 Pounds.

List Price:$17.99 USD
New From:$15.00 USD In Stock
buy now

3M 08682 Single Step Primer – 30 ml (Automotive)

Primer for windshields to promote urethane adhesion to the windshield; can also be used to touch up pinchweld scratches and to primer encapsulated glass. Single use size.

List Price:$18.28 USD
New From:$18.28 USD In Stock
buy now

3M 08612 Window-Weld 3/8″ x 15′ Round Ribbon Sealer Kit (Automotive)

Contains one roll of sealer and setting blocks. Its unique feature of controlled compressibility allows easy installation yet will not squeeze out or allow light to contact pinch weld. Sufficient material to replace one windshield or backlight.

List Price:$19.95 USD
New From:$19.95 USD In Stock
buy now


See larger image

Additional Images:Img - B00063Z4FM
Img - B00063Z4FM

3M 08621 Window-Weld 5/16″ x 15′ Round Ribbon Sealer Roll (Automotive)

Bulk packed version of part number 08611. Its unique feature of controlled compressability allows easy installation yet will not squeeze out or allow lite to contact pinchweld. One 15 foot roll is sufficient material to replace one windshield or backlite.

List Price:$16.85 USD
New From:$16.85 USD In Stock
buy now


See larger image

Additional Images:Img - B0039752R2
Img - B0039752R2

3M 08620 Window-Weld 1/4″ x 15′ Round Ribbon Sealer Roll (Automotive)

Bulk packed version of part number 08610. Its unique feature of controlled compressability allows easy installation yet will not squeeze out or allow lite to contact pinchweld. Sufficient material to replace one windshield or backlite.

List Price:$14.99 USD
New From:$14.99 USD In Stock
buy now


See larger image

Additional Images:Img - B0002KO3JM
Img - B0002KO3JM
Img - B0002KO3JM

Performance Tool W80647 Windshield Molding/Door Clip (Automotive)

Performance Tool W80647 6pc Multi Wedge Tool Set Multi-wedge pry tools are designed to gently remove door panels, dashboards, consoles, and more Works well to remove trim moulding, bezels, and various clips and plastic fastens Features different wedge shapes allowing you to get under and lift pieces away without damage Durable non-marring nylon prevents scratching to painted surfaces and delicate panel surfaces Perfect set for body shops, electronics installers and the home garage.

List Price:Price Not Listed
New From:0 Out of Stock
buy now


See larger image

Additional Images:Img - B06XH1K7QF
Img - B06XH1K7QF
Img - B06XH1K7QF
Img - B06XH1K7QF
Img - B06XH1K7QF
Img - B06XH1K7QF
Img - B06XH1K7QF
Img - B06XH1K7QF

Clearshield Windshield Repair Kit Professional Auto Glass Repair Kit for Rock Chip or Cracks – Restores to a Fine Smooth Finish (200+ Repairs)

Professional Windshield Repair Kit (200+ Repairs)

What’s Included:

Tools for 1 Professional doing 200+ Repairs
Supplies for 200+ Specific Spots

1 Tool Box
1 Repair Bridge (Injector)
8 Inner O-Rings
4 External End Seals
30ml Thin Resin Bottle
15ml Pit Sealer Bottle
100 Curing Squares
1 UV Light
10 Razor Blades
1 Drill Set (Drill, Battery, and Charger)
1 Collet
20 Drill Bits


List Price:$299.00 USD
New From:$299.00 USD In Stock
buy now

Lisle 48600 Offset Windshield Locking Strip Tool (Automotive)

Offset handle for extra clearance and two double ended tips to fit most applications.Offset design provides installers extra clearance to work on windshields or other glass on semis, skid Loaders and agricultural applications with locking strips.

List Price:$13.60 USD
New From:$13.60 USD In Stock
buy now

CRL General Purpose Windshield and Back Glass Rubber Installation Tool

Best Tool for Gasket Set Windshields Quality Built in USA The CRL Hook Tool is the most commonly used tool for working with gasket set glass. First designed for the easy removal of cotter pins, this tool became known as a “Hook Tool” and was soon the favorite tool for the glass technician. Most professionals have at least two of these in their tool box so they never get caught without one.

List Price:$7.83 USD
New From:$7.83 USD In Stock
buy now


See larger image

Additional Images:Img - B072ZB3VCX
Img - B072ZB3VCX
Img - B072ZB3VCX
Img - B072ZB3VCX
Img - B072ZB3VCX

Bywabee Quick Fix Windshield Repair kit

Ok, So you have a chip in your windshield. You just want to get it fixed, but don’t want to pay all that extra money just because of the “brand” name. Forget about those high priced brand name kits. This is the kit for you. 1. Easy to follow instruction 2. Enough resin to do multiple repairs 3. Top notch repair at a Economic price.

List Price:$8.94 USD
New From:$8.94 USD In Stock
buy now

American Windshield Repair Bridge (single bridge)

Our single American Windshield Repair Bridge comes with free resin, pit fill, and a seal set! Our windshield repair bridge needs only one rear set screw – and our bridges are NOT triangle shaped for a reason. Having the set screw in line with the injector gives you the best possible mechanical advantage for mounting, applying pressure on the resin, and ease of use. We prefer to keep things as simple as possible. Our bridges are guaranteed for life even against normal wear and tear (lifetime guarantee does not include seals)!

Features:

  • It provides the best possible mechanical advantage
  • It can be mounted on any windshield
  • It allows for maximum pressure when forcing resin into damage

List Price:$179.00 USD
New From:$179.00 USD In Stock
buy now


See larger image

Additional Images:Img - B077J8K97Y
Img - B077J8K97Y
Img - B077J8K97Y

Ryobi 18-Volt ONE+ Power Caulk and Adhesive Gun with charger and battery (Misc.)

Ryobi introduces the new and improved 18-Volt ONE+ Power Caulk and Adhesive Gun. This tool features over 500 lbs of push force to handle higher viscosity material with ease and can apply more than 200 tubes of caulk per one charged battery.

List Price:$158.90 USD
New From:$158.90 USD In Stock
buy now


See larger image

Additional Images:Img - B077T8RSXG
Img - B077T8RSXG
Img - B077T8RSXG
Img - B077T8RSXG
Img - B077T8RSXG
Img - B077T8RSXG
Img - B077T8RSXG

Sausage Caulking Gun Manual Drive with Stainless Steel Barrel by BOUSH(Silver) (Misc.)

The heavy duty stainless steel smooth rod caulking gun fits 20-ounce sausage/10.3-ounce cartridge/20- ounce bulk of building/glass sealant and has an 18:1 thrust ration for use with medium to high viscosity materials such as silicone, acrylic, adhesives, asphalt, butyl, and cement, which makes adhesive flow more easily and reduces your hand fatigue. The accessories are made of steel and aluminum alloy, all ensure a long lasting durability. 360°rotating handle, allows barrel to rotate for maintaining bead orientation so that meet the needs of different working angles.

What’s in the box: 1 sausage caulking gun + 2 plastic nozzles

How to load the gun with a sausage pack(or cartridge)?
1.Unscrew the front ring cap.
2.Hold the back handle, press the thumb release trigger, and draw the rod all the way back.
3.Slide the sausage pack(cartridge) down the barrel, just right up to the barrel front edge, no need slide into the barrel bottom.
4.Use a scissor to cut a right size opening in the sausage pack.(or cut off the cartridge nipple)
5.Trim the nozzle to the desired angle and size.
6.Place the nozzle inside the barrel edge and screw the cap back on. Now you’are ready to extrude material. You can stop the flow by pressing the metal release trigger with your thumb.

Warm tip: If you want use it wish cartridge or other silicone tube, just loosen the nut on the end of the rod, remove the front blue plastic pusher plate(plunger disc) and only with the metal frame, fasten with the nut again, reassemble the gun barrel back on the trigger handle. Now the space in there allows for the outside of the cartridges to sit down in.
Please clean it out every time after you use the bucket caulk or adhesive. Thanks.


List Price:$37.99 USD
New From:$37.99 USD In Stock
buy now

Comments are closed.