Lasko 3720 20″ Weather-Shield Performance Box Fan – Features Innovative Wind Ring System for Up to 30% More Air (Kitchen)
This high-performing box fan from Lasko features a patented Weather-Shield motor for worry-free window use, plus a high performance grill for ultimate air flow. Three speeds and Save-Smart efficiency make this an ideal fan for any room where you need to increase cooling airflow.
Additional features include:
This Canarm 20in. Wall Exhaust Fan is efficient, easy to install and low maintenance. Plus, it is built to last with quality materials and design. Needs to be Hardwired Yes, Fan Diameter in. 20, Volts 115, HP 1/3. Totally enclosed and thermally protected 1/3 HP motor Blades are galvanized and well-balanced for durability and efficiency Heavy wire chrome-plated OSHA guards Rugged steel welded box housing with durable powder-coated finish Aluminum louver shutters with long-life nylon bushing Requires hardwired connection 25 1/4in.W x 16in.D x 22 3/4in.H
Professional Grade Products 9800512 Metal Shutter Exhaust Fan for Garage Shed Pole Barn Hydroponic Ventilation, 10″ (Misc.)
Shutter mounted exhaust fans are widely used for ventilating stores, offices, factories, shops and farm buildings. They exhaust when needed and then the shutter automatically closes to stop infiltration of air when the fans are not operating.
Shutter mounted exhaust fans are widely used for ventilating warehouses, stores, factories, workshops, greenhouses and farm buildings. Shutter frames with pre punched mounting holes allow for easy installation.
Variable speed control is specifically engineered for use in commercial ceiling fans. Features an infinite speed adjustment ensuring hassle-free use. The minimum speed adjustment screw conveniently fits any standard electrical box. For best results, mount in a dry location.
Little Giant Egg Flats for Small to Extra-Large Sized Eggs (30 Eggs per flat; Pack of 12 Flats) (Kitchen)
Little Giant Egg Flats for Small to Extra-Large Sized Eggs (30 Eggs per flat; Pack of 12 Flats)
RP Paint Arrestors are disposable paint overspray collectors that efficiently trap paint solids before they reach the exhaust stack. These were the first dry filters specifically designed to control paint overspray. Through the years, the RP family of standard, high efficiency and high capacity Paint Arrestors has proven to be a cost effective, efficient way to handle virtually every overspray requirement. Fabricated of slit and expanded paper, or slit and expanded paper with polyester, the multiple layers of RP Paint Arrestors are assembled so the intake side has larger openings than the exhaust side. This provides depth loading for maximum service life. This series provides good all-around performance for general applications and can be used for most coatings applied by the various spray coating methods. The 3000 Series provides a degradable, economical solution to your overspray needs. Its recommended usage consists of two pad layers in tandem.
The Styrofoam Paint Arrestors are the most popular choices for overspray capture without the need for any holding grids. They feature a two-piece interlocking grid of styrene louvers with tabs on the edges, to enable them to fit easily into an exhaust plenum. They are also fully washable and can be used multiple times while also being easy to dispose of. The Styrofoam Paint Arrestors are laboratory tested at above 98 percent overspray capture efficiency, and they comply with all federal, state and local environmental laws that govern overspray capture. These paint arrestors come in a standard size of 20″ x 20″ x 2″. They can be shaken, air blown or washed clean, and can be dissolved in thinner. The structure of the foam allows free air flow, preventing the exhaust fan from drawing a vacuum. Key Features of the Styrofoam Paint Arrestors 20″ x 20″: Reusable up to 20 times. Shake, air blow or wash. Dissolves in thinner. Free air flow prevents fan from drawing a vacuum. Contains no CFCs. Technical Specifications: Dimensions: 20″ x 20″. Thickness: 2″.
20″ x 25″. Re-use 10 to 20 times…shake, air blow or wash clean. Free air flow prevents exhaust fan from drawing a vacuum. No support grids or brackets needed-2″ thick. Dissolves in thinner. Contains no CFC’s…environmentally safe.
Paint Spray Booth Paint Pockets GREEN â€” 99.43% Arrestance Efficiency
This filter is 20x20x1 with an actual size of 19.5×19.5×1. Efficiency designed to meet the air filtration efficiency criteria required to gain points toward certification in the leadership in energy and environmental design (Leeds) green building rating system. Electrostatically charged filter media captures airborne allergens smaller than 1 micron great for helping reduce airborne allergens such as bacteria, particles that carry viruses, pollen, mold spores, fine dust, and pet dander. Accumulair filter material will not support the development of mold, mildew, bacteria or other microorganisms in normal use. No chemicals added. Accumulair filters are chemical free over 30-times more efficient at capturing micro particles than ordinary fiberglass filters. Lasts up to 3 months this product is listed and rated by underwriters laboratories as Ul. Class 2.