It’s a Flanger, and a 7/32″ Punch, in one handy pneumatic tool Double-action head swivels to let you create flanges and holes from any angle with just a squeeze of the handle. Produce 0.040″ offset flanges Punch 7/32″-dia. holes Requires 4 cfm at 90 psi
Repairs made in half the time with absolutely no stretching or distortion of material. Makes a perfect joint even through underbody deadener in sculptured contours and high crowns. No need to remove parts of the vehicle – with the Blair Flanger, all work is performed from one side. Lightweight 7 cam action flanger springs open for quick release and position of next compression.
Astro Pneumatic’s 605ST ONYX Straight Type Punch/Flange Tool includes a 5.5 mm Punch that is designed for easy replacement. This tool performs hole punching and panel crimping and features a rotating head for convenient use. When in use, every pull of the lever delivers a single punch or a single flange crimp with precision control. This tool forms an offset crimped edge on sheet metals for no-bump lay welds. Its design is lightweight, durably constructed and reduces metal fabrication time in half.
Neiko 30091A Pneumatic Hole Punch and Flange Crimp Joggler Tool, Pistol Grip | 1/4″ NPT Air Inlet, 90-120 PSI (Tools & Home Improvement)
The Neiko Tools Pneumatic Hole Punch and Flange Crimp Joggler Tool can crimp flanges and punch holes on welding surfaces for panel making, automotive restoration and construction. This type of crimp and punch tool used by auto body shop, metalworking, machining specialists to consistently make quick, precise lay welds. It can handle wide variety of tasks from making holes for fastening and welding to crimping lap joint sheets and pipes This air powered flange punch tool uses a standard 1/4-inch NPT air inlet and 3/8″ (ID) hose, so it can be powered by a standard air compressor that can be commonly found anywhere from a home garage to a professional body shop. This tool is intuitively designed with pistol grip and paddle lever and exerts 90 to 120 PSI, so it is much easier to operate than manual powered hand tools. SPECS: Punch Capacity: 7/32″ (5.5 mm) Pistol Stroke: 5/32″ (4mm) Air Inlet Thread NPT: 1/4″ Air Hose I.D. Size: 3/8″ (10mm) Avg. Air Consumption: 4 CFM Air Pressure: 90-120 PSI
Seam Buster, Body Paint, Hardened Steel
LTMS 021104 Double Head Metal Sheet Nibbler Cutter Drill Attachment with Wrench and Parts Workshop Tool Black 5pcs Set (Tools & Hardware)
Adjustable die guide for left, right or straight cutting. Leaves no burrs or bent edges. Specifications: free speed SPM: 3,500, average CFM: 4.
The Astro 727 ONYX Heavy Duty Air Nibbler is built for professional grade applications. It works on up to 17-gauge cold rolled steel, and can eat through sheet-metal without deformation of the edges. This unit can cut over an inch a second, with unmatched balance. Specifications: Speed RPM: 3,500 CPM Cutting Capacity: Steel : 17-gauge Air Consumption: 2 cfm Air Inlet: 1/4″ Overall Length: 7.7″ Weight: 1.79 lbs
Genesis GES40 4.0 Amp Corded Swivel Head Variable Speed Electric Power Metal Shear (Tools & Home Improvement)
The Genesis GES40 swivel head electric metal sheer tool cuts through various metals with ease with a 4.0 amp motor.
– 4.0 Amp Motor
Genesis’ two year warranty means you buy with confidence.
Gino Development 01-0101 TruePower 18 Gauge Heavy Duty Electric Sheet Metal Shear Tin Snips Cutter Nibbler (Tools & Home Improvement)
This 18-gauge metal Shear features 120V/60Hz and 3.5 amps. Great for auto body work or any other metal cutting project, this metal Shear makes smooth and clean cuts in aluminum, plastic or sheet metal as thick as 18 gauge. 1-Year warranty.
Hitachi CN16SA 16-Gauge 3.5-Amp Sheet Metal Nibbler
This Ingersoll Rand heavy-duty reciprocating saw cuts intricate shapes and tight radius curves on flat and curved surfaces. Cuts all types of aluminum, plastic, fiberglass and sheet metal. Case Included: No, Tool Length (in.): 8 1/4, Min. Hose Size (in.): 3/8, Typical Application: Cutting in all types of material, Blade Included: Yes, Includes (qty.): (6) Blades, (2) Hex wrenches, Air Inlet Size (in. NPT): 1/4, Tool Weight (lbs.): 1.32, Air Consumption (CFM): 8 average and 15 CFM at load, Strokes Per Minute (SPM): 10,000, Lock Off Throttle: Yes
Coarse 24 TPI air reciprocating saw blades 6 pack
features and benefits:
reduces Frictional heat that is generated during the cutting application, which will enhance overall performance
coarse standard pitch
The AIRCAT 6350 i8s a Low Vibration Compact Air Saw. What makes the 6350 different than other Air Saws in this category is the low weight, low vibration, compact design with all metal blade retainer. We’ve reduced the vibration level by 50% for better control and the 6350 only weighs 1.12 lbs. Only 8″ long the 6350 can cut up to 3/8″ steel in a high volume/industrial application. The blade retainer is all metal – no plastic parts that will wear prematurely like other Air Saws. The adjustable rear exhaust keeps debris out of the work area. The 6250 comes with 2 blades each in 18T, 24T and 32T saw blades and can accept standard saw blades. At 9500 strokes per minute the 6350 is very fast and has an adjustable blade guard. The 6350 uses 3.5 CFM and like all air tools it is designed to run at 90 PSI at the tool with the trigger engaged. The standard AIRCAT 2 Year Warranty makes the 6350 the best tool in this category.
TACKLIFE Classic Reciprocating Saw, Sawzall with Rotary Handle(Left & Right 90°), 0~2800SPM Saber Saw, 2 Blades(Wood 6T HCS, Metal 14T BIM), Carrying Case, LED Lights, Ideal Recip Saw for DIY/RPRS01A (Misc.)
Tacklife – Professional team on Amazon, which deals only with development of the tools.
We commit ourselves to using qualitative tools to improve the quality of life.
✔2 LED Work Light and Adjustable Rotating Handle
✔Supplied Reciprocating Blades is convenient to direct use
✔Wide Range of Adaptation to Cutting Multiple Materials
VonHaus 9 Amp Reciprocating Saw 1–1/8” Stroke Length Electric Saw with 2500 RPM Variable Speed, Trigger Switch and 8 Blades for Wood and Metal Cutting Ideal for Home and Garden (Misc.)
VonHaus 9 Amp Reciprocating Saw Tackle a range of DIY and construction tasks with the powerful VonHaus Reciprocating Saw. High performance 9 Amp motor combined with a no load speed of 0 -2500rpm and a stroke length of 1 – 1/8″ make extremely light work of cutting through materials including wood, sheet steel, pipe, steel rods, aluminium, brass and copper. Variable Speed Trigger Large variable speed trigger switch allows you to gradually build speed by increasing the pressure – so you can always achieve the right speed for the job – without having to change blades. Once you’ve achieved max speed, you can set it using the lock on button – ideal for long cuts or for extended periods of use. Versatility is high on the agenda with the Reciprocating Saw, which comes with eight spare blades – 2 X metal cutting blades and 6 X wood cutting blades. Quick-change Chuck Quick-change chuck allows for easy tool-less blade changing, so you can get straight on with the task in hand. Built to last, the VonHaus Reciprocating Saw boasts an external interchangeable carbon brush design (spare carbon brushes not included) and robust sole plate. Ergonomic design is suitable for right and left-handed use and comes with a soft grip handle. Technical Specification Power: 9 Amp Voltage: 120V No Load Speed: 0 – 2500 rpm
EZARC R922PM with 14TPI delivers excellent cutting performance on metal pipe and profile
Blade Material: Bi-Metal with 8% Cobalt
Teeth Per Inch: 14TPI
Blade thickness: 0.9mm
Total Length: 225mm/9”
Cutting Length: 150mm
Cutting Material: Medium-thick sheet metals (3 to 8mm), metal pipes/profiles (dia.<150mm)
Shank fits: Bosch , Dewalt , Milwaukee , Makita , Hitachi , etc.
The Bosch CRS180 18-Volt Reciprocating Saw features an impressive array of feature and benefits. It has a 1-1/8-inch stroke for enhanced material removal per stroke. Its two speed ranges of 0-2,400 SPM and 0-2,700 SPM allow match of speed to the application. The compact size of the saw makes it easier to get into tight spaces. Its handle is ergonomically shaped with comfort zone in the soft-grip area for a secure hold and low user fatigue. The saw also includes the Bosch-exclusive Lockjaw blade holder for fast one-handed blade change. The saw’s own electronic package includes Electronic Motor Protection (EMP) to protect the motor against overload and ensures a long lifetime. The CRS180 uses Bosch 18-Volt Lithium-Ion batteries – sold separately – that feature the innovative Cool Pack design to ensure optimum heat dissipation and therefore increase lifetime by up to 100-percent compared to batteries without Cool Pack. Finally, the Bosch Electronic Cell Protection (ECP) protects the battery against overload, overheating and deep discharge. Battery and charger sold separately.
Flexzion Fender Lip Roller Wheel Arch Rolling Extending Flaring Reforming Former Repair Upgrade Install Tire DIY Tool Adjustable DamageProof for Home Use or Auto Body Shop (Misc.)
Fender roller is one of the most common tools in the auto repair industry. It is perfect for rolling your vehicles fenders, increasing the clearance between your tire and fender, or repair wheel arch collision damage. Fender rollers are commonly used for rolling fenders on lowered vehicles for better clearance on aftermarket rims and wider tires. Fender-Rolling extending kit won’t let your fender ruin expensive tires on lowered vehicles use the roller to easily and quickly roll the entire inner lip on a wheel opening to increase fender/tire clearance. Increases clearance between tire and fender, flares fenders, and repairs wheel-arch collision damage 2-3/4″ Roller 12″ to 18″ Extend Bar. The body is made of iron which possesses of excellent hardness. The fully adjustable arm allows you to pull or push gradually. This fender roller is easy to face variety of needs and is the perfect choice for your vehicle fender repairing.
Highlights:Bench or Stationary : StationaryVoltage : 120 voltsDisc diameter : 6″Blade angle : 45 degree max.Cutting thickness : 1″
The PORTER-CABLE PCE700 14″ Chop Saw features a 15 Amp, 3,800 RPM motor with replaceable brushes which provides power and durability. The quick-release material clamp allows for easy material cutting and removal, and a cutting fence with miter adjustment allows up to 45 degree angles to be cut. It offers a spark deflector that provides safety and clear line of sight for cutting, along with a heavy duty steel base to provide stability while cutting. It also has a spindle lock for easy blade changes. Specs: Blade Diameter: 14″, Arbor Size: 1″, Wheel Diameter: 14″, Power Cord: 8ft, Max Capacity (Round): 4-3/4 x 5-1/3″.
CO-Z HSS 5PCS Titanium Step Drill Bit Set with Automatic Center Punch, 50 Sizes in 5 High Speed Steel Drill Bits Set for Sheet Metal with Aluminum Case, Multiple Hole Stepped Up Bits for DIY Lovers
Our step drill bit set provides faster and more convenient drilling than single flute bits. The
easy-to-read step markings and targets save time when drilling holes, perfect for HVAC work,
home repairs and light jobs such as drilling holes in plastic, aluminum, copper, stainless steel
and many other types of sheet metal. Double cutting blades and X-type openings design
ensure a faster and smoother cutting and 3-sided shank design prevents slip in drill chuck.
Lily’s Gift Rotary Burr Set 5 Piece Rotary File Rasp Carbide Burrs Set Drill Die Grinder Bits Grinding, Polishing, Carving, Trimming (Tools & Hardware)
File Card used to clean debris and material build-up from metal files and rasp teeth. steel fill material.
KCC Industries DR4402 Premium Value Pack 3/8 Inch Double Sided High Speed Rotary Spot Weld Cutter Drill Bit Tool (2 Pack) + Bonus 2 Replacement Blades
Included in Package:
Remove spot welds without damaging the underlying panel. Essential for auto body restorations. This kit includes (6) 3/8″ double-ended spot weld cutters, (3) spring-loaded centering tips, (1) arbor and (1) 3/8″ solid one-piece cutter. Arbor fits 1/4″ and larger drills.
Description 3pc HSCO Spot Welder Drill Bit Set, Titanium Coating
*6.5mm (1/4″). 8mm (5/16″) and 10mm (3/8″)
*High Speed Cobalt Bit, Titanium Coating Prevents Bit Dulling from Overheating.
*1-3/4″ (45mm) Length
*Flat Shaft for Sure Grip, Special Centering Nib Design to Avoid Slipping.
*comes With Carry Aluminum Case.
Features and Benefits: 3) 3/8″ Cutters; fit 3/8″ and 1/2″ hand held drill chucks. Arbor Assembly (11123) with skip proof Pilot. Extra pilot included. Made of M2 High Speed Steel. Made in the USA. These annular tools cut clean, burr-free and round holes fast unlike twist drills that push or hole saws that tear through materials. There’s no dead zone, so less thrust is required and no deforming of stock or jagged edges occurs. The cutters are for the heavy-duty use in sheet metal and materials up to 1/2″ thick. Multiple cutting teeth, precision ground which allows for a long tool life. These cutters are packaged in a plastic carrying case.
Ideal for drilling in tough metal, including heavy-duty abrasive alloy metal drilling on hardened steel. Made from industrial grade High-speed steel for increased durability. 8% Cobalt alloy is heat and abrasion-resistant. 135-degree split-point tip starts drilling immediately with less force and eliminates “walking” across the work surface. Metal index case for easy bit access and identification. Includes drill bit sizes 1/16- to 1/2-inch in 1/64-inch increments. IRWIN Tools Cobalt High-Speed Steel Drill Bit, 29-Piece Metal Index Set (3018002).
High-quality Ironton files are made of T12 high carbon steel. Set includes a large variety of shapes and coarseness to handle many filing tasks. Other Pieces (qty.): 17, Pieces (qty.): 17, Storage Type: None, Tool Set Type: Homeowner
Needle File Set (HIGHEST QUALITY 6 PIECE SET) Hardened Alloy Strength Steel – Mini Needle File Set Includes Flat, Flat Warding, Square, Triangular, Round, and Half-Round File. (Tools & Home Improvement)
6 Needle File Set by Tarvol
14″ Adjustable Body File Holder Use with 14″ body files. Handle designed for both right and left hand use. Turnbuckle design permits flexing. Durable cast aluminum and plated steel construction. See AES430 for 14″ x 8 tpi Milled Tooth File
Fits all 14_ flexible body files. Aluminum and steel construction. Turnbuckle design allows body file to be curved concave or convex. Files mount quickly and easily on holder with two mounting screws. For right and left hand use.