For those that use Nason Automotive Paint Products, having a mixing chart is a must. The below charts, include both topcoats and undercoat products. Topcoats being your colors in singles stage to base-coats, as well as your clears. Undercoats are your primers and sealers.
To ensure that your paint job has so issues during the painting process or sometime after. Always follow the recommended mixing ratios. If you don't find what you are looking for here. Look on the can, ask your paint supplier or Contact Me and I will get you the information. These charts are also Free to Download, see details at the bottom of the page.
Nason UnderCoat Mixing Ratio Chart
Product | Components | Mix Ratio | Air PSI | Application | Flash Time | Baking |
---|---|---|---|---|---|---|
Etch Primer | 491-17 Etch Primer 441-43 Activator-Reducer | 1 Part 1 Part | 30-40 PSI HVLP 7-9 PSI | 1 Medium Wct Coat | 15-30 Minutes Prior to TopCoating | Do not Bake |
Epoxy Primer | 491-16 Ful-Poxy 483-19 Activator-Reducer | 1 Part 1 Part | 45-55 PSI HVLP 7-10 PSI | 1 Full Wet Coat or 2 Medium Coats | 1 Hour Prior to TopCoating | 20-30 Mm. @ 140° |
Primer Surface Lacquer | 421-23 SelectPrime or 421-08 Acrylic 441-62 thinner | 1 Part 1 Part | 35-45 PSI HVLP 7-9 PSI | 2-4 Medium Wet Coats | 5-10 Min. Between Coats | |
2K Urethane | 2K Urethane SelectPrime 483-87 Activator | 4 Parts 1 Part | 35-45 PSI HVLP 8-10 PSI | 2-3 Medium-Wct Coats | 5-10 Min. Between Coats 2-3 Hours Dry Time | 30 Mm. @ 140° |
Water-Borne | 470-04 High-Build W-B Primer | Ready to Spray | 30-40 PSI HVLP 7-9 PSI | 2 Medium Wct Coats | 10 Min. Between Coats 30-60 Min Dry Time, Dry Sand Only | 15-30 Mm. @ 70° |
Ful-Seal Acrylic Sealer | 422-23 Ful-Seal Select Sealer | Ready to Spray | 40-50 PSI HVLP 7-9 PSI | 1 Even Medium Wct Coat | 10 Min. Prior to TopCoating | |
2K Urethane Sealer | 422-48 SelectSeal 483-87 Activator | 4 Parts 1 Part | 30-40 PSI HVLP 7-9 PSI | 1 Full Uniform Wct Coat | 15 Min. Prior to TopCoating |
Nason TopCoat Mixing Ratio Chart
Product | Components | Mix Ratio | Air PSI | Application | Flash Time | Baking |
---|---|---|---|---|---|---|
Nasco/Astron Alkyd Enamel | Nasco/Astron Color 483-08TM Hardener or 483-13TM/14TM 441-)001 Reducer with 483-08TM only | 8 Parts 1 Part 2 Parts w 483-08 | 60-80 PSI HVLP 8-10 PSI | 2 Medium-Full Wct Coats 1 Final Mist Coat | 10-15 Min. Between Coats 10-15 Mut. To Bake | 20-30 Mm. @ 140° |
Ful-Base | Ful-Base Enamel Color 483-08 Hardener 441-20, 441-21,441-22 Reducer | 8 Parts 1 Part 2 Parts | 40-70 PSI HVLP 8-10 PSI | 2 Medium-Full | 10-15 Min. Between Coats | 20-30 Mm. @ 140° |
Ful-Cryl II | Ful-Cryl II Color 483-11 Activator 441-20, 441-21,441-22 Reducer | 8 Parts 1 Part 2 Parts | 40-70 PSI HVLP 8-10 PSI | 2 Medium-Full | 5-10 Min. Between Coats | 20-30 Mm. @ 140° |
Ful-Thane 2K Urethane | Ful-Thane 2K Urethane Color 483-15 Activator 441-20, 441-21,441-22 Reducer Option 483-18 Accelerator | 8 Parts 1 Part 2 Parts 2-4 oz per gal | 40-70 PSI HVLP 8-10 PSI | 2 Medium-Full Wct Coats 1 Final Mist Coat | 5-10 Min. Between Coats | 20-30 Mm. @ 140° |
FleetThane HS Ful-Thane HS 3.5 Urethane | FleetThane/Ful-Thane HS 483-52 Activator 483-54 Accelerator | 3 Parts 1 Part 4 oz per gal | 60-80 PSI 12-15 PSI Pot HVLP 8-10 PSI | 1 Medium Wct 1 Full Wet | 10-20 Min. Between Coats 15 Min to Bake | 20-30 Mm. @ 140° |
FastDry Acrylic Enamel | FastDry Acrylic Enamel Color 441-20, 441-21,441-22 Reducer | 8 Parts 2 Parts | 60-80 PSI 8-12 PSI Pot HVLP 8-10 PSI | 2 Medium-Full Wct Coats | 5-10 Min. Between Coats | |
Full-Base Base Coat | Full-Base Base Coat Color 483-30 Activator 441-20, 441-21,441-22 Reducer | 8 Parts 1/2 Part 4 Parts | 35-45 PSI HVLP 8-10 PSI | 2-3 Medium-Full Wct Coats or Until Hiding | 5-10 Min. Prior to Clear Coating | |
Clear Coat (High Solids) | 465-00 Select Clear 483-84 Mid or 483-85 Hi Temp Act 441-20, 441-21,441-22 Reducer | 2 Parts 1 Part Up to 20% | 35-40 PSI HVLP 8-10 PSI | 2 Medium Wct Coats | 5-7 Min. Between Coats 5 Min to Bake | 30 Mm. @ 140° |
Clear Coat (Spot/Panel/Overall) | 496-00/498-00 Select Clear 483-78 Fast or 483-79 Medium Act | 4 Parts 1 Part | 30-40 PSI HVLP 6-8 PSI | 2 Medium Wct Coats | 3-5 Min. Between Coats 10-15 Min to Bake | 20-30 Mm. @ 140° |